In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but large dog strollers it’s really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so that you get something which looks like a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak once you place the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.
Then it is time to glue the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it could look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure the ears are level and make certain it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you’ll have to do some sanding to be sure that it’s safe on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.